Mabone a LED a entsoe ka likarolo tse 'maloa, tse kang chip ea LED, mokhanni oa LED, PCB, optics, heatsink, molaoli oa LED, le tse ling. Likarolo tsena kaofela li sebetsa 'moho ho fana ka tlhahiso ea leseli la ho qetela. Phoso efe kapa efe ea likarolo tsena e ama ts'ebetso ea lisebelisoa. Ka hona, ho tseba ka litekanyetso le boleng ba karolo ea LED ho bohlokoa.
Ha re hlahlobe likarolo tsohle tsa mantlha tsa mabone a LED le mosebetsi oa tsona. Karolong e latelang ea puisano, ke ile ka boela ka fana ka tataiso ea ho khetha likarolo tsa boleng bo phahameng ba LED. Kahoo, ha re ikakhele ka setotsoana:
LED ke eng?
LED e emetse 'Li-Diode tse Khanyang tse Emitting'. Ke mofuta oa semiconductor o hlahisang leseli le bonahalang ha motlakase o feta ho oona. LED e latela electroluminescence molao-motheo oa ho hlahisa leseli. Ts'ebetsong ena, li-electrone tse ka har'a semiconductor li kopana hape le masoba ha li ntse li kopana le motlakase. Sena se ntša matla ka sebōpeho sa li-photon, tseo re li bonang e le leseli le bonahalang.
Leha ho le joalo, 'mala oa leseli le hlahisitsoeng o itšetlehile ka palo ea doping le mofuta oa semiconductor. Ka mohlala, Gallium Nitride (GaN) e sebelisoa ka li-LED tse putsoa le tse tšoeu, athe bakeng sa li-LED tse tala le tse mosehla, Gallium Phosphide (GaP) e sebelisoa e le semiconductor.
Likarolo Tse Ka sehloohong tsa Leseli tsa LED
PCB
Potoloho ea Boto e hatisitsoeng kapa PCB ke boto ea motheo moo li-LED li rekisoang le ho hokahana ka motlakase. Tsena li entsoe ka FR4, koporo, aluminium, silkscreen, resin le khalase. Li-PCB' li fumaneha ka libopeho le boholo bo fapaneng ho latela ts'ebeliso ea LED. Ka mohlala, tšesaane le li-PCB tse tenyetsehang li sebelisoa ka mabone a hlobolisa a LED ao u ka kobang le ho a khaola ho latela litlhoko tsa hau tsa boholo. Ka lehlakoreng le leng, li-PCB tse thata tse entsoeng ka FR4 li sebelisoa linthong tse kang mabone a LED kapa mabone a phanele ea LED.
Chip Chip
LED chip ke karolo e ka sehloohong ea mabone a LED a hlahisang leseli. Li ka ba tsa boholo bo fapaneng le ka liphutheloana tse fapaneng. Ho ipapisitsoe le theknoloji le ho paka, li-chips tsa LED ke tsa mefuta e latelang:
1. SMD LED
Lisebelisoa tsa Surface Mount kapa li-LED tsa SMD ke li-chips tse nyane tsa LED tse kentsoeng ka kotloloho ho PCB. Liphutheloana tsena tsa LED li sebelisoa ka mabone a marang-rang a LED, lithelevishene, lipontšo, joalo-joalo.
Ho khanya ha li-LED tsa SMD ho fapana bakeng sa libopeho le boholo bo fapaneng. Li hlalosoa ka lipalo e le SMD2835, SMD3528, kapa SMD 5050. Linomoro tse peli tsa pele tsa palo li bonts'a bophara ba LED, 'me linomoro tse peli hamorao li lekanya bolelele ba eona. Mohlala- SMD3528 e bolela hore bophara ba LED ke limilimithara tse 3.5, 'me bolelele ba eona ke 2.8 millimeters.
2. COB LED
Chip-on-board kapa COB ke theknoloji ea mabone e kenyang li-LED haufi-ufi ho boto e le 'ngoe ea potoloho, ho etsa moralo o boreleli. Ho fapana le li-LED tsa SMD, li-LED tsa COB ha li na lekhalo le bonahalang lipakeng. Kahoo, ha ho na li-hotspots, e fana ka mabone a boreleli le a tsoelang pele.
Joalo ka ha li-LED li kena COB li phuthetsoe ka bongata bo boholo, li fana ka leseli le khanyang haholoanyane. Kahoo, tsena li loketse lits'ebetso tse hlokang khanya e tsepamisitsoeng le e se nang moeli.
3. CSP LED
Sephutheloana sa Chip Scale (CSP) ke theknoloji e ncha ea ho paka ea LES e etselitsoeng mabone a kopaneng, a sebetsang hantle haholo. Boholo ba liphutheloana tsena tsa LED bo lekana le boholo ba chip ea LED. Ka hona, tsena li ntle haholo bakeng sa litlamorao tsa mabone a phahameng haholo le a se nang matheba. Li-LED tsa CSP li sebelisoa haholo ho li-strip tsa LED, mabone a tlase, mabone a liphanele, mabone a likoloi (mabone a pele, mabone a morao, joalo-joalo), le tse ling.
Joale u ka 'na ua ferekana pakeng tsa COB le CSP, kaha ka bobeli li etselitsoe ho ba le letsoalo le phahameng. CSP e kopane ho feta COB kaha li-chips tsena li pakiloe hantle 'me ha li nke sebaka se eketsehileng ho PCB. Ntle le moo, li na le mebala e metle ho feta COB. Leha ho le joalo, ha ho tluoa tabeng ea ho khanya, li-LED tsa COB li entsoe ka tlhahiso e phahameng ea lumen. Ka hona, haeba u hloka khanya e phahameng, tsamaea le COB, 'me bakeng sa compactness, CSP ke khetho e molemo ka ho fetisisa.
4. Li-LED tse nyane
Li-LED tse nyane ke li-LED tsa theknoloji e phahameng tse etselitsoeng li-chips tse nyane (ka tlase ho 0.2mm ka boholo). Li-LED tsena tse nyane li sebelisoa lipontšong, haholo ho li-TV, matlapa le lilaptop. Li-LED tse nyane, ha e le hantle, ke borokho lipakeng tsa li-LED tsa setso le li-micro LED. Li fana ka khanya e phahameng, phapang e betere, le ho sebetsa hantle ha matla.
Phepelo ea motlakase
Phepelo ea motlakase ke karolo e kholo ea mabone a LED a tsamaisang li-LED. E fetola AC ea mantlha hore e be DC e hlokehang bakeng sa li-LED. Lisebelisoa tsa motlakase tsa LD e ka ba mefuta e latelang:
1. Lisebelisoa tsa Matla a Kamehla (CC).
Lisebelisoa tsa motlakase tsa kamehla li boloka tlhahiso ea hona joale e tsitsitse; leha ho le joalo, li-voltages lia fapana ho latela mojaro oa LED. Ba thibela LED hore e se ke ea senyeha ka ho thibela ho fetoha ha hona joale. Li-LED tse nang le matla a phahameng kapa lisebelisoa tse nang le likhokahano tse ngata tsa LED ka letoto li sebelisa phepelo ea motlakase ea CC. Ka mohlala, mabone a COB LED le mabone a tlaase a matla a phahameng a sebelisa matla ana.
2. Lisebelisoa tsa Motlakase oa Kamehla (CV).
Lisebelisoa tsa motlakase tsa kamehla li loketse lits'ebetso tsa motlakase o tlase joalo ka mabone a LED. Lisebelisoa tsena tsa motlakase li fana ka tlhahiso e sa feleng ea motlakase, mohlala, 12V kapa 24V, ho lumella hore motlakase o fapane ho itšetlehile ka mojaro.
3. Lisebelisoa tsa Matla a Fokolang
Lisebelisoa tsa motlakase tse timang li tla le theknoloji ea dimming e hahelletsoeng joalo ka Teko, PWM (Pulse Width Modulation), kapa 0-10V dimming. Sena se o lumella ho fetola matla a mabone a hau ho latela maikutlo a hau kapa boemo boo u bo ratang.
4. Plug-and-Play Power Supplies
Lisebelisoa tsa motlakase tsa plug-and-play li etselitsoe lisebelisoa tsa LED tse nang le matla a tlase joalo ka likhoele tsa LED, mabone a deskeng le mabone a khabisitsoeng. Mohlala, mohala oa LED oa 5V USB o sebelisa adaptara e joalo ea plug-and-play. Lisebelisoa tsa motlakase tsa plug-and-play li bonolo haholo ho hokela. Lisebelisoa tsena tsa motlakase tse balloang ho sebelisoa ha li hloke mathata a marang-rang kaha li tla le plug e tloaelehileng le transformer e kentsoeng.
Mokhanni oa LED
The Mokhanni oa LED e laola motlakase le motlakase oa lebone la LED bakeng sa ts'ebetso e sireletsehileng. Leha ho le joalo, hangata bakhanni ba LED ba fapanyetsana le phepelo ea motlakase, empa ba na le phapang e kholo.
Lisebelisoa tsa motlakase tsa AC/DC li fana ka mefuta e mengata ea motlakase bakeng sa lisebelisoa tsa ntlo. Ka lehlakoreng le leng, bakhanni ba LED ba etselitsoe ka ho khetheha ho laola matla a li-LED. E boloka motlakase o loketseng le phallo ea hona joale bakeng sa LED ka ho thibela ho fetoha ha motlakase le hona joale. Lerata le lumang kapa ho panya ha LED ho bakoa ke ho se sebetse hantle ha bakhanni ba LED.
Taolo ea LED
Balaoli ba LED e u lumella ho fetola matla a khanya, ho fetola 'mala oa leseli, phello ea eona, le tse ling. Lilaoli tsa LED li ka ba tsa mefuta e fapaneng ho latela leseli leo u le sebelisang. Mona ke lilaoli tse tloaelehileng tsa LED:
1. PWM LED Dimmer
PWM e emetse Pulse Width Modulation. E fokotsa khanya ka ho e panya-panya ka lebelo la ho otla ha pelo ho sa bonahaleng mahlong a motho. U ke ke ua bona ho panya ha leseli empa ho e-na le hoo u fumane hore le fifetse. Leha ho le joalo, lik’hamera li khona ho lemoha ho panya ha hona; ke ka hona PWM LED dimmer e sa lokelang lits'ebetso tse sebetsanang le ho nka lifoto.
2. IR LED Controller
Balaoli ba IR LED ba sebelisa matšoao a infrared (IR) ho laola li-LED. Taolo ena e theko e tlase haholo ebile e na le tlhophiso e bonolo haholo. Li-control tsa IR tsa LED li sebelisoa haholo bakeng sa taolo ea mabone a ntlo. Leha e se mats'oao a infrared (IR) ho laola li-LED, li ts'ehetsa sebaka se khuts'oane haholo bakeng sa taolo. Ntle le moo, mokhoa oa sefahleho le sefahleho oa molaoli le leseli ke oa bohlokoa ho fetisa lets'oao la IR.
3. RF LED Controller
Lilaoli tsa LED tsa radiofrequency (RF) ke balaoli ba mefuta e mahareng. Ho fapana le molaoli oa IR LED, RF ha e hloke pono e tobileng ea leihlo; e ka fetisa melaetsa ka marako kapa linthong tse ling. Kahoo, balaoli ba RF LED ba fana ka puisano ea nako e telele.
4. Molaoli oa LED oa Wi-Fi
Lilaoli tsa Wi-Fi LED li sebelisa mats'oao a Wi-Fi ho laola leseli ka mohala, remoutu, kapa sesebelisoa sefe kapa sefe se se nang mohala. E fana ka sebaka se seholo sa ho laola mabone a hau. Tsena li bonolo ho sebetsa kaha u ka khona ho laola leseli ka smartphone ea hau u sebelisa lisebelisoa. E boetse e fana ka likarolo tse bohlale joalo ka taolo ea lentsoe.
5. Bluetooth LED Controller
Joalo ka ha lebitso le fana ka maikutlo, mats'oao a Bluetooth a sebelisoa ho lilaoli tsena ho hokela lebone. Tsena li bonolo ho li kenya 'me li ka sebetsoa ka smartphone ea hau. Leha ho le joalo, ha ho bapisoa le balaoli ba LED ba Wi-Fi, balaoli ba Bluetooth LED ba na le mefuta e fokolang ea tšireletso.
6. 0 / 1-10V Molaoli oa LED
Ena ke selaoli sa LED sa analoge se laolang ho khanya ha LED ka ho fetola motlakase pakeng tsa 0/1 ho isa ho 10V. Ho 10V, LED e fana ka khanya ea 100%, athe ho 0/1V, e fana ka boemo bo fokolang ba khanya. Balaoli bana ha ba hloke li-switches tse ling. Ntle le moo, li-control tsa LED tsa RGBW 0/1-10V li na le likarolo tse felletseng tsa taolo ea ho ama. Mona, RGBW e 'ngoe le e' ngoe e fana ka phetoho e potlakileng ea mebala, taolo ea khanya, le mekhoa le litlamorao tse ngata.
7. Molaoli oa LED oa DMX
Digital Multiplex kapa DMX LED molaoli o sebelisa protocol ea DMX512 ho laola mabone a LED. U sebelisa molaoli ona, u ka laola li-LED tse ngata ka yuniti e le 'ngoe. Ntle le phetoho ea khanya, haeba ho fanoa ka taolo holim'a ho fetoha ha mebala e khanyang, lipontšo tsa mabone a hlophisitsoeng esale pele, liketsahalo tse ikhethileng, le litlamorao tse matla.
Balaoli ba LED ba DMX fana ka taolo ea likanale tse ngata; e ka sebetsa ka 'mala o le mong, RGB, RGBW, esita le li-pixel tsa LED tse khonang ho sebetsana le tsona. Lilaoli tsena tsa LED li sebelisoa haholo bakeng sa sethala, theatre, le lits'ebetso tse ling tsa mabone a litsebi.
8. DALI LED Controller
DALI e emetse "Digital Addressable Lighting Interface." E fana ka puisano ea litsela tse peli bakeng sa ho laola mabone a mangata a LED ho tsoa mohloling o le mong. Leha e theko e boima, e fana ka taolo e kholo ea ho iketsetsa sistimi ea mabone ea libaka tsa hau tsa bolulo le tsa khoebo. Ho feta moo, e hokahana le taolo ea ts'ireletso ea moaho (BSM) ho laola leseli le bohareng.
Ho oela ha mocheso
Leha LED e sebetsa ka mocheso o tlase, e ka futhumatsoa haholo ka lebaka la matla a motlakase kapa sebaka se sa lekaneng sa moea. Ho boloka ts'ebetso e bolokehileng, a ho oela ha mocheso e kentsoe ka har'a PCB ho tlosa mocheso hole le LED. Ka tsela ena, e boloka ts'ebetso e pholileng, e thibela ho chesa haholo, 'me e sireletsa li-LED hore li se ke tsa senyeha.
Casing kapa Bolulo
Casing kapa ntlo ke sebaka se kampetsoeng se sebetsang e le tšireletso. E pota-potile li-LED le likarolo tse ling tsa motlakase 'me e li thibela ho kopana le litšila, lerōle kapa mongobo. Matlo a ka etsoa ka thepa e fapaneng ho latela ts'ebeliso ea leseli.
| Casing kapa thepa ea Bolulo | Sesebelisoa sa LED |
| aluminium | Li-LED tse nang le matla a phahameng, mabone a likhohola, mabone a indasteri |
| Polycarbonate (PC) | Mabone a seterateng a LED, mabone a li-tube, khanya ea ka ntle |
| Acrylic (PMMA) | Liphanele tse khabisitsoeng tsa LED, matšoao, lipontšo |
| Tšepe ea Die-Cast | Lisebelisoa tsa LED tsa kantle, mabone a phahameng-bay |
| Glass | Li-bulbs tse khabisitsoeng, li-LED tsa mofuta oa khale |
| silicone | Lisebelisoa tsa LED, mabone a ka tlas'a metsi |
Base
Motheo o hokahanya lebone la LED le mohloli oa matla. E fana ka tšehetso ea motlakase le mochini ho tleloubu, ho netefatsa hore sesebelisoa se lula se tsitsitse sebakeng se kentsoeng. Ho ipapisitsoe le ts'ebeliso, motlakase le ho kenya, motheo oa leseli la LED e ka ba tsa mefuta e fapaneng. Ka mohlala, li-chandeliers, mekhabiso, le mabone a tloaelehileng a ntlo a sebelisa E26/E27 motheo. Hape, bakeng sa mabone a mabone a LED ho sebelisoa metheo ea T-series joalo ka T5, T8, kapa T12.
Optics
Optics ke sekoaelo se senyenyane sa dome se behiloeng ka kotloloho holim'a LED. E entsoe ka polasetiki e thibelang ho senya e tiisang tsela e nepahetseng ea ho bonesa. Optics e kenyelletsa- optics ea mantlha le ea bobeli.
Optics ea mantlha e sebetsa joalo ka encapsulation ea LED ho fana ka tataiso ea leseli la mantlha. Athe optics ea bobeli e hloekisa lebone, eona e koahela lense, sebonela-hōle le li-diffuser. Lilense li sebelisetsoa ho tsepamisa kapa ho hasa mahlaseli a khanya. Ka lehlakoreng le leng, li-reflects li tsamaisa khanya e 'ngoe bakeng sa ho ntlafatsa ts'ebetso ea khanya, joalo ka mabone a moroallo le mabone a pele. The Li-diffuser tsa LED li sebelisoa ho fokotsa khanya le ho hlahisa sephetho se bobebe. Li ka ba tsa mefuta e fapaneng - e hlakileng, e frosted le opal.
Optics ke karolo ea bohlokoa ea LED kaha e ama karolo ea khanya ea leseli. Likarolo tsa optical li tšoana le lense, li-reflector le li-diffuser li fetola lebone ho hlahisa lipaterone tse tšesaane, tse mahareng kapa tse sephara.
| Mofuta oa Optic | Beam Angle Range | Phello ea Leseli | Likopo tse loketseng |
| Lilense (Convex, TIR) | 10 ° - 30 ° | E tsepamisitse leseli libakeng tse moqotetsane | Spotlights, mabone a molumo |
| Maikutlo | 30 ° - 60 ° | E tsamaisa leseli bakeng sa maballo a mahareng | Mabone a tlase, mabone a pina |
| Likhathatso | 60 ° - 180 ° | E hasanya leseli bakeng sa maballo a pharaletseng | Lebone le akaretsang / tikoloho, ho koahela sebaka |
Mehala
Mefuta e fapaneng ea lithapo e sebelisoa ka mabone a LED. Tsena li sebelisetsoa ho hokahanya lebone ho phepelo ea motlakase kapa ho hokahanya leseli le le leng ho le leng. Mona ke mefuta e tloaelehileng ea lithapo tse sebelisoang mabone a LED:
1. Lithapo tsa ho hokela
Lithapo tsa khokahanyo li hokahanya mabone a LED le phepelo ea motlakase. Hangata lithapo tsena li entsoe ka koporo kapa aluminium 'me li tla le PVC kapa Teflon insulation bakeng sa polokeho. Phapang e tloaelehileng ka ho fetisisa ea terata ea khokahanyo e kenyelletsa lithapo tse le 'ngoe bakeng sa li-circuits tse bonolo, lithapo tse ngata tsa mantlha bakeng sa lits'ebetso moo ho hlokehang likhokahano tse ngata tse nang le mohala o le mong, le likhoele tse feto-fetohang moo terata e feto-fetohang kapa ho sisinyeha ho hlokahalang.
2. Lihokelo tsa Lebone
Lihokelo tsa mabone li kopanya mabone a mangata hammoho. Ka mohlala, li-connectors tsa LED li sebelisoa ho kopanya mabone a mangata a LED hammoho. Lihokelo tsena li tla ka mefuta ea 2-pin, 3-pin, 4-pin, 5-pin le 6-pin ho latela mofuta oa mabone a marang-rang a LED. Mohlala- li-connectors tsa 2-pin tsa LED li sebelisoa bakeng sa likhoele tsa LED tsa 'mala o le mong,' me li-4-pin li sebelisoa ho hokahanya likhoele tsa RGB tsa LED.
3. Lithapo tsa Matla a Plug ea Lebota
Lithapo tsena li hokahanya mabone a LED le lebota la lerako. Ho ipapisitsoe le maemo a lehae, lithapo tsena tsa motlakase li fumaneha joalo ka 2-prong kapa 3-prong plugs.
Lisebelisoa tsa LED li sebetsa joang?
Ntlha ea pele, motlakase o tsoang phepelong ea matla o phalla ka har'a chip ea LED. Thepa ea semiconductor ka hare ho theko e tlaase e hlahisa leseli ka mor'a electroluminescence. Ka mor'a moo, li-optics li tsamaisa le ho tsepamisa leseli le hlahisitsoeng ho latela mokhoa o lakatsehang oa sepakapaka o ipapisitseng le ts'ebeliso.
Ho netefatsa ts'ebetso e nepahetseng, e sebetsang hantle, mokhanni oa LED o laola motlakase le hona joale bakeng sa ts'ebetso e nepahetseng. Sekepe sa mocheso leboneng la LED se leleka mocheso o hlahisitsoeng ho boloka LED e pholile.
Qetellong, ntlo kapa casing e sireletsa likarolo tsena kaofela, e sebetsa e le thebe. E thibela moea, mongobo le lerōle ho kena LED.
Tataiso ea ho Khetha Lisebelisoa tsa Leseli tsa LED tsa boleng bo holimo
- Reka lisebelisoa tsa mabone a LED ho tsoa ho lihlahisoa tse tsebahalang ho netefatsa boleng
- Lekola tšebelisano lipakeng tsa chip ea LED le mokhanni oa LED
- E-ea bakeng sa teba ea mocheso e entsoeng ka thepa e nang le conductivity e ntle ea mocheso bakeng sa ho hasana ha mocheso ka katleho
- Li-optics le lilense li lokela ho etsoa tsa boleng bo holimo ho fumana sekala se lakatsehang
- Reka setsi se tšoarellang se mamellang kutu bakeng sa LED ea hau. U tlameha hape ho nahana ka maemo a lehae ha u ntse u reka setsi; mohlala, the E26 base ke ea maemo a US, 'me motheo oa E27 ke oa maemo a Europe.
- Tekanyetso ea IP ke ntlha ea bohlokoa eo u lokelang ho e ela hloko ha u reka lisebelisoa tsa LED tsa kantle. A phahameng IP rating e bolela tšireletso e molemo khahlanong le lerōle le mongobo.
- Reka LED e phahameng CRI bakeng sa ho nepahala ha mebala ho betere
- Lisetifikeiti li bohlokoa ho netefatsa hore likarolo tsa hau tsa LED li finyella litekanyetso tsa machaba. Kahoo, pele u reka, batla litemiti joalo ka- CE, UL, ETL, le litifikeiti tse ling tse amehang. Hape, batla setifikeiti sa Energy Star ho netefatsa hore mabone a hau a sebetsa hantle.
Lipotso tseo u ka li Botsang Mofani oa Hao ho Fumana Boleng ba ho Fitting LED
Ha u ntse u reka lisebelisoa tsa LED, mona ke lipotso tseo u ka li botsang morekisi ho netefatsa hore li lekana litlhoko tsa hau:
Lipotso ka Mokhanni oa LED
- Na mokhanni oa LED o ka tima?
- Nako ea bophelo ea mokhanni oa LED ke eng?
- Sekhahla sa nalane sa ho hloleha ha mokhanni ke eng lilemong tsa pele tse 5?
- Na mokhanni oa hau oa LED o na le likarolo tsa ts'ireletso tse hahelletsoeng ho thibela phallo e feteletseng ea hona joale le motlakase?
Lipotso Mabapi le Setsi sa Mocheso
- Ke lisebelisoa life tse sebelisoang ka sekoting sa mocheso?
- Na licheso tsa mocheso li feta tekong, kapa li netefalitsoe?
- A na u ka fana ka moralo oa sinki ea mocheso le lintlha tsa hore na e thusa joang ho pholisa?
Lipotso ka Li-Chips tsa LED
- Li-chips tsa LED li simolohile hokae, 'me lebitso la tsona ke lefe?
- Nako ea bophelo ea chip ea LED ke efe?
- A na u ka mpolella ka tlhahiso e khanyang le katleho ea chip ea LED?
- Na chip ea LED e netefalitsoe?
- CCT, CRI, le lintlha tsa IP tsa li-chips tsa LED ke eng?
Lipotso Mabapi le Matlo
- Tekanyetso ea IP ea matlo ke eng?
- Ho sebelisoa thepa efe ka tlung?
- Ntlo e entsoe joang, 'me e laola ho hasana ha mocheso joang?
Maemo le Melawana Bakeng sa Lisebelisoa tsa LED
Ho netefatsa polokeho le ts'ebetso e nepahetseng ea LED, o tlameha ho boloka maemo le melaoana ea machaba kapa ea tikoloho. Mona ke litekanyetso tse tsebahalang haholo tsa likarolo tsa LED:
| Category | Tekanyetso/Molao | Tlhaloso |
| Litekanyetso tsa polokeho | UL 8750 | E akaretsa litlhoko tsa polokeho bakeng sa bakhanni ba LED, balaoli, li-module le liphutheloana. |
| IEC 62560 | E netefatsa polokeho bakeng sa mabone a LED a ikemetseng a sebetsang ka holimo ho 50V. | |
| IEC 62838 | E akaretsa polokeho ea mabone a LED a nang le li-voltages tse ka tlase ho 50V AC kapa 120V DC. | |
| Maemo a Tshebetso | ENERGY STAR® | E netefatsa li-LED tse ipapisitseng le matla a matla, CRI, tlhokomelo ea lumen, le matla a matla. |
| TLHOKOMELISO C78.377 | E hlalosa lintlha tsa chromaticity bakeng sa li-LED tse khanyang tse tšoeu. | |
| NEMA SSL 7A | E fana ka litataiso bakeng sa mehloli ea mabone a LED a ka timang le li-dimmers tsa phase-cut. | |
| Maemo a Tikoloho | Litekanyetso tsa Tšireletso ea Ingress (IP). | E hlalosa maemo a ts'ireletso ea lerōle le metsi bakeng sa li-LED tsa kantle kapa tsa indasteri. |
| Taelo ea RoHS | E thibela lintho tse kotsi joalo ka lead le mercury likarolong tsa LED. |
Ntle le moo, ho na le litekanyetso tse ngata tsa lehae kapa tsa libaka tseo likarolo tsa hau tsa LED li tlamehang ho li phethahatsa bakeng sa polokeho le ts'ebelisano.
Tšebeliso e Tloaelehileng bakeng sa Mabone a LED
1. Mabone a Bolulo
Mabone a LED ke khetho e ntle ka ho fetisisa bakeng sa tšebeliso ea bolulo. Li sebelisoa haholo bakeng sa mabone a akaretsang, mosebetsi, mokhabiso le mabone a khabisitsoeng. Mabone a siling le mabone a tlase ke likhetho tse tsebahalang bakeng sa mabone a siling. Hape, likhoele tsa LED ke khetho e tsebahalang bakeng sa ka tlas'a mabone a khabinete. Mabone a LED a boetse a sebelisoa libakeng tse ka ntle joaloka lirapa, libaka tse haufi le matamo, likarache, joalo-joalo.
2. Commercial & Office Lighting
Sebopeho se sebetsang hantle sa mabone a LED se etsa hore e ratoe bakeng sa lits'ebetso tsa khoebo moo mabone a bolokiloeng lihora tse telele. Liofisi, lihotele, lireschorente le mabenkele a mabenkele kaofela a sebelisa mabone a LED bakeng sa mefuta eohle ea litlhoko tsa mabone. Ntle le mabone a akaretsang le a khabisitsoeng, lisebelisoa tse kang LED neon flex li boetse li sebelisoa e le matšoao libakeng tsa khoebo tse kang mabenkele a mabenkele, lireschorente, joalo-joalo.
3. Leseli la Liindasteri
Mabone a LED a phahameng-bay le a tlaase a sebelisoa haholo libakeng tsa polokelo le lifekthering. Hape, leseli la LED le sebelisoa bakeng sa tšireletso e kholo libakeng tse ka ntle. Ntle le moo, mabone a LED a sa phatloheng a sebelisoa libakeng tsa indasteri tse kotsing ea ho ba le kotsi.
4. Leseli la Street & Outdoor
Mabone a LED a phahameng a lekantsoeng ka IP a sebelisoa maboneng a kantle. Ntle ho moo, ho sebelisoa mabone a seterateng litseleng tse kholo, litseleng le lirapeng tsa boikhathollo. Mabone ana a baballa matla haholo, 'me boholo ba 'ona a na le lisebelisoa tsa letsatsi tse fanang ka matla a tala.
5. Ba bang
Mabone a LED a sebelisoa mefuteng eohle ea likarolo, ho kenyeletsoa- tsa likoloi, tsa metsing, tsa temo ea lirapa le tse ling. Tsena li ntle haholo bakeng sa mabone a khabisitsoeng. Mohlala, lisebelisoa tse feto-fetohang tsa LED joalo ka mabone a marang-rang a LED lia kobeha ebile lia seha. U ka li sebelisa ka litsela tse likete tsa pōpo. Mabone a LED a boetse a sebelisoa e le hlahisa mabone lekaleng la temo.
Ho rarolla mathata a Mabone a LED
Ha u ntse u sebelisa mabone a LED, u ka tobana le mathata a mang. Ke thathamisitse lintlha tse tloaelehileng tseo boholo ba LED e li bakang le mekhoa ea ho li rarolla:
| bothata | Lisosa | tharollo |
| LED Ha e Bule | • Wiring e hlephileng • Phepelo e fosahetseng ea motlakase • Ho hloleha ha mokhanni | • Hlahloba kgokelo • Etsa bonnete ba hore phepelo ea motlakase e sebetsa ka nepo • Tlosa mokhanni sebaka haeba ho hlokahala. |
| Li-LED tse phatsimang | • switjha ya dimmer e sa dumellaneng • Ho fetoha ha motlakase • Mathata le mokhanni oa LED | • Sebelisa dimmer e lumellanang le LED • Hlahloba botsitso ba matla • Tlosa mokhanni ha ho hlokahala |
| Mathata a Fokolang | • Li-LED tse sa timang • Switjha ya dimmer e fosahetseng • Mokhanni ea sa lumellaneng | • Netefatsa hore li-LED ha lia tima • Sebelisa dimmer e nepahetseng • Netefatsa tshebeletsano ya mokhanni |
| Ho futhumatsa | • Moea o fokolang • Sekoaelo sa mocheso se fosahetseng • Mokelikeli o feteletseng | • Ntlafatsa phallo ea moea • Hloekisa sekoting sa mocheso • Sebelisa LED e nang le motlakase o fokolang |
| Mobala oa LED o fetoha | • Ho roala phosphor ho tsofala • Ho chesa haholo • Ho se tsitse ha mokhanni | • Fetola likarolo tsa LED • Ntlafatsa maemo a ho pholisa |
| Modumo o Buzzing kapa o Humming | • Dimmer tse sa tsamaisaneng • Mokhanni oa boleng bo tlaase | • Sebelisa mokhanni oa LED oa boleng bo phahameng le dimmer e lumellanang le LED |
FAQs
Ntlha ea bohlokoa
E 'ngoe le e' ngoe ea likarolo tsa LED, joalo ka chip ea LED, mokhanni, lithapo, PCB, joalo-joalo, ke karolo ea bohlokoa e tlisang ts'ebetso e nepahetseng ho sebopeho. Ka hona, hoa hlokahala ho reka lisebelisoa tsa LED tse tiisitsoeng ho bahlahisi / lihlahisoa tse tšepahalang.
Leha ho le joalo, haeba u reka mabone a marang-rang a LED, LEDYi ke eona tharollo. Mabone ohle a rona a hlobolisa a entsoe ka PCB ea boleng bo holimo le bakhanni ba LED. Ntle le moo, re fana ka CRI e phahameng le likhetho tse ngata tsa IP ho likhoele tsa rona tsa LED. Hammoho le sena, lethathamo la lihlahisoa tsa rona le kenyelletsa likarolo tsa LED tse kang- Li-driver tsa LED, Balaoli ba LED, Litlaleho tsa aluminium tsa LED, 'me Li-connectors tsa LED. Kahoo, haeba u batla lithupa tsa LED tse netefalitsoeng le tsa boleng bo holimo kapa likarolo tsa LED, iteanye le rona KA PELE KA POTLAKO!
